Royal communications International has a large variety of HF SSB antennas available to fit your requirement.  



The long-wire antenna requires less space than any dipole antenna, it is very simple to install and can be installed horizontally, in a slope, or as an inverted "L" (shown). Requires antenna tuner and good grounding for efficient operation.


500 Watts PEP/AVG

The MB series are high efficiency HF folded dipole antennas covering 1.8-30 MHz with a power rating of 1 KW Voice or 250 watts in Data or "continuous duty." Compact, with a minimum horizontal tower spacing the antenna has excellent overall radiation efficiency. Construction is of stainless steel wire elements with die cast aluminum component housings and UV resistant fiberglass spacer rods with coaxial cable connector. Lightweight but extremely robust and with a low total mass and low wind loading. Can be installed as "flat top" broadband dipole, a "sloper" or as an inverted V.


USA Sales for Bushcomm antennas

Broadband Fixed Base Station Dipole HF Antenna Systems, such as the SWC100 & BBA100. 


These systems require no transceiver interfacing other than a coaxial lead. The Broadband Design of these Wideband HF / MF Radio Antennae ensures compatibility with most brands of HF SSB Transceivers, such as Alinco, Codan, Icom, Kenwood, Racal, Micom and Yaesu


Tactical & Military Portable VHF & HF Antenna Systems

We Manufacture a wide range of Portable & Quick Deployment Antenna Systems and Masts - This includes "Wideband & Broadband" HF Aerial systems which do not require a tuner


Compact and Small HF Antenna Systems to suit Limited Space Applications

We have a number of Vertical, self supporting Horizontal and Loop HF Antennas specifically designed for Small/Tight places.

"Quickfit" Easy install Communications & Enviromental Towers & Masts

Lightweight Aluminium Roof or Ground Mount Radio Tower/Masts.  These 6~12 Metre systems are available in a range of flexible options . Perfectly suited for remote area 3G Phone or wireless applications. Also popular for use with weather and pollution measurement equipment.  


7.3 to 15 meter

The PA2 Aluminium Sectional Mast Series are lightweight, quick to deploy, easily transportable, and can withstand the toughest of conditions. They are perfect for lighter head-loads.


Swing aWay Antenna Mount

Affordable, Reliable and Removable Royal Communications International introduces the first hassle-free, removable antenna mount.


6ft whip with ratchet mount

6ft loaded whip antenna with stainless steel ratchet mount.  This antenna can be mounted on a horizontal, vertical or any angle in between.  The High Voltage cable is easy to attached and replace if necessary.  


TAA1000 OR FAD1400

The mobile whip antennas come in two lengths, 2.4 meters (96 inches) stainless steel or 3.4 meters (3 ea. 48.4 inch fiberglass sections). The antenna bases are designed for easy installation on any vehicle. An antenna tuner must be used for operation in the HF frequency range of 1.6 to 30 MHz.


Broadband folded dipole

The “Wolf” Folded Dipole antenna is designed as a regional coverage antenna intended for near and midrange HF communications in environmental disasters and military tactical scenarios. This antenna can be configured as a Flat Top NVIS antenna, Inverted “V” for medium to long ranges, or a Sloping directional antenna. Its strong NVIS (Near Vertical Incidence Skywave) capabilities allow for communications over mountainous terrain or in Jungle environments and its full 2-30 Mhz spectrum broadband coverage makes it an excellent antenna for ALE operations without the need for a tuner/coupler reducing system costs. No radial ground plane or grounding is required making the antenna ideal for rooftop or on the fly installations. The “Wolf” antenna can be purchased in Tactical or Permanent models.


1Kwatt base station or portable broadband antenna

The Whiskey antenna is designed as a local, regional to continental (0-2500miles) coverage antenna intended for High Frequency Communications. It is an 0mni-directional horizontally polarized system. Typical use is for disaster and rapid deployment scenarios. Its strong NVIS (Near Vertical Incidence Skywave) capabilities allow for communications over mountainous/jungle terrain and its full 2-30Mhz spectrum broadband coverage makes it an excellent antenna for ALE operations without the need for a tuner/coupler. Radial ground plane or grounding is not required making the antenna ideal for ground/rooftop installations and mobile “on the move” field use. The “Whiskey” antenna can be purchased in transportable or permanent models.

Please reload


As of 30 September 2020 Micom products are no longer available for purchase. 

​We will continue to supply compatible HF antenna tuners, antennas and various other Micom accessories as listed on our SHOP page.

​Royal Communications International, Inc. will continue to provide support and repair services for the Micom 3 series radios for the duration of remaining warranty. Repairs for Micom transceivers that are no longer covered under warranty will be available as long as commercially viable. With regard to Micom-2 series transceivers, unfortunately, we are unable to continue providing repair services, due to a lack of available spares and parts.

​The Barrett 4000 series transceivers are inter-operable with Micom transceivers, certified by JITC to MIL-STD-181-141B and are NTIA compliant.  The Barrett 4000 series transceivers include key differentiators from the Micom and competing transceivers in the market. Namely, built in IP networking, color touchscreen display, removable/remote-ready control head, USB port for easy upgrades and programming, and several other advanced features. Barrett Communications Pty Ltd., was founded in Australia, and through growth and acquisition have had a presence in the United States for 40 years. 

​Additionally, we are excited to announce the 4000 series radios are now manufactured in the United States, specifically to meet the demanding requirements of our federal, state and commercial customers. The user-friendly Barrett 4000 series radios boast a (6) six week or shorter lead time, this combined with Royal’s class leading technical and sales support, full-service capabilities and a USA factory, you can be assured of fast and reliable support.  


3135 Coachman Court, Oceanside, CA 92056

Tel:  760-529-9518

Fax: 760-529-9568


During the summer June-July 2017, pilot Brian Lloyd commenced his round-the-world flight to commemorate Amelia Earhart’s route eighty years ago in 1937. The two month flight followed Earhart’s historic equatorial route. Royal Communications International, Inc. was honored to support Brian throughout his expedition.


“I chose the Micom3T transceiver for my historic recreation of Amelia Earhart's flight due to its robust construction and outstanding reputation for reliability in a harsh environment. While the control head is mounted in the cabin and lives in a more benign environment, the receiver/transmitter unit resides in an unheated and unpressurized avionics bay where the temperature may vary from +45C to -20C and the altitude may top 24,000 feet. In spite of this harsh environment the Micom3T performed well. 


But even the best equipment can fail and I did experience an intermittent failure of the receiver/transmitter unit. A single call to Royal Communications had a replacement unit on its way to me on the other side of the world in a day. Clearly the emphasis was to get my communications back up and running reliably as quickly as possible. I am extremely pleased with the level of support I received. The replacement unit operated and continues to operate reliably.


I recommend Royal Communications and Micom products without any reservation. They provide excellent service, great support, and reliable products. Thanks Royal!” - Brian Lloyd

    • Facebook Social Icon
    • LinkedIn Social Icon