HIGH FREQUENCY ANTENNAS AND ANTENNA TUNERS

Royal communications International has a large variety of HF SSB antennas available.  From a simple long-wire antenna to a 1500 watt broadband vertical, we have the antenna to fit your requirement.  

CWA-125

Medium to Long Range

Mounting hardware included for use with F2265 antenna tuner. Installed total height is only 12 feet. Includes 4ea 6 ft loaded whip antennas.  Tested extensively and found to be an excellent antenna by many US State and Federal Agencies.  Excellent results for medium to long range communication.

BROCHURE

BROADBAND VERTICAL

1KW Continuous Duty HF/SSB Antenna

The EASP-WHF1K-ANT/NR is a broadband HF whip antenna intended for use with Automatic Link Establishment (ALE) capable equipment for HF communications. No external tuning is necessary for operation over the 2 to 30 MHz HF bands.

 

Minimal Maintenance requirements

High Reliability

Broadband

No tuning devices, no radials required

1.5 KW PEP/ 1KW AVG

Rugged fiberglass whip element and stainless steel mounting hardware for roof or marine mounting

BROCHURE

WOLF HF ANTENNA

Broadband folded dipole

The “Wolf” Folded Dipole antenna is designed as a regional coverage antenna intended for near and midrange HF communications in environmental disasters and military tactical scenarios. This antenna can be configured as a Flat Top NVIS antenna, Inverted “V” for medium to long ranges, or a Sloping directional antenna. Its strong NVIS (Near Vertical Incidence Skywave) capabilities allow for communications over mountainous terrain or in Jungle environments and its full 2-30 Mhz spectrum broadband coverage makes it an excellent antenna for ALE operations without the need for a tuner/coupler reducing system costs. No radial ground plane or grounding is required making the antenna ideal for rooftop or on the fly installations. The “Wolf” antenna can be purchased in Tactical or Permanent models.

BROCHURE

WHISKEY

1Kwatt base station or portable broadband antenna

The Whiskey antenna is designed as a local, regional to continental (0-2500miles) coverage antenna intended for High Frequency Communications. It is an 0mni-directional horizontally polarized system. Typical use is for disaster and rapid deployment scenarios. Its strong NVIS (Near Vertical Incidence Skywave) capabilities allow for communications over mountainous/jungle terrain and its full 2-30Mhz spectrum broadband coverage makes it an excellent antenna for ALE operations without the need for a tuner/coupler. Radial ground plane or grounding is not required making the antenna ideal for ground/rooftop installations and mobile “on the move” field use. The “Whiskey” antenna can be purchased in transportable or permanent models.

BROCHURE

PERMANENT MAST KIT

7.3 to 15 meter

The PA2 Aluminium Sectional Mast Series are lightweight, quick to deploy, easily transportable, and can withstand the toughest of conditions. They are perfect for lighter head-loads.

PUSH-UP MAST KITS

7.5 meters to 12 meters

Push up masts, perfect for many mobile applications such as antenna testing, lighting, meteorological surveys and aerial photography. Our range of lightweight portable masts can be used for many applications.

Our portable push up masts are lightweight, quick to deploy and robust in the harshest environments.

​

​

BUSHCOMM ANTENNAS

USA Sales for Bushcomm antennas

Broadband Fixed Base Station Dipole HF Antenna Systems, such as the SWC100 & BBA100. 

 

These systems require no transceiver interfacing other than a coaxial lead. The Broadband Design of these Wideband HF / MF Radio Antennae ensures compatibility with most brands of HF SSB Transceivers, such as Alinco, Codan, Icom, Kenwood, Racal, Micom and Yaesu

 

Tactical & Military Portable VHF & HF Antenna Systems

We Manufacture a wide range of Portable & Quick Deployment Antenna Systems and Masts - This includes "Wideband & Broadband" HF Aerial systems which do not require a tuner

 

Compact and Small HF Antenna Systems to suit Limited Space Applications

We have a number of Vertical, self supporting Horizontal and Loop HF Antennas specifically designed for Small/Tight places.

​

"Quickfit" Easy install Communications & Enviromental Towers & Masts

Lightweight Aluminium Roof or Ground Mount Radio Tower/Masts.  These 6~12 Metre systems are available in a range of flexible options . Perfectly suited for remote area 3G Phone or wireless applications. Also popular for use with weather and pollution measurement equipment.  

Bushcomm Website

HALF LOOP

NVIS on the move

The advanced Micom NVIS Half Loop Antenna System provides rapid, fully automatic and highly reliable voice and data HF radio communications suitable for mobile land and marine applications-short, medium and long range. Complying with military standards, the system can withstand severe shock and vibration as well as extreme weather conditions and is designed to operate with all Micom HF-SSB radios. The Half Loop system provides advanced tuning solution to replace existing large vertical and bent whip antennas.

BROCHURE

FAD1410

Vehicle mounted antenna system

Designed to operate with Micom HF-SSB radios, the advanced micomWima wide-band mobile automatic antenna system provides rapid, fully automatic tuning for HF radio communications in land or marine mobile applications.

Meeting MIL-STD-810 for shock and vibration, the fully weatherpoof, fully immersible micomWima ensures rapid link establishment and the highest level of communication reliability, under any operational condition.

MANUAL

F2265D

125 Watt PEP antenna tuner

The antenna tuner is a weatherproof, rugged, microprocessor controlled, automatic unit designed for voice operation. A single RF cable connects any Micom-2 or 3 series radio to the tuner providing both RF power and tuner control. The fast tuning design is ideal for Automatic Link Establishment (ALE) operation. The Antenna Tuners meet MIL STD 810D.

BROCHURE

HEAVY DUTY ANTENNA TUNER

Voice and data antenna tuner

The FLN2818 antenna tuner is a heavy duty version of the F2265. It is a weatherproof, ruggedized, microprocessor controlled, automatic unit designed for data and voice operation. A single RF cable connects any Micom-2 or 3 series radio to the tuner providing both RF power and tuner control. The automatic antenna tuner is a tuning unit designed for Automatic Link Establishment (ALE) operation. The Antenna Tuner meets MIL STD 810D.

BROCHURE

SWAM

Swing aWay Antenna Mount

Affordable, Reliable and Removable Royal Communications International introduces the first hassle-free, removable antenna mount.

BROCHURE

80-003 WHIP ANTENNA

6ft whip with ratchet mount

6ft loaded whip antenna with stainless steel ratchet mount.  This antenna can be mounted on a horizontal, vertical or any angle in between.  The High Voltage cable is easy to attached and replace if necessary.  

BROCHURE

HF-MOBILE WHIP ANTENNA

TAA1000 OR FAD1400

The mobile whip antennas come in two lengths, 2.4 meters (96 inches) stainless steel or 3.4 meters (3 ea. 48.4 inch fiberglass sections). The antenna bases are designed for easy installation on any vehicle. An antenna tuner must be used for operation in the HF frequency range of 1.6 to 30 MHz.

BROCHURE

LONG-WIRE

TAA6030

The long-wire antenna requires less space than any dipole antenna, it is very simple to install and can be installed horizontally, in a slope, or as an inverted "L" (shown). Requires antenna tuner and good grounding for efficient operation.

BROADBAND FOLDED DIPOLE

500 Watts PEP/AVG

The MB series are high efficiency HF folded dipole antennas covering 1.8-30 MHz with a power rating of 1 KW Voice or 250 watts in Data or "continuous duty." Compact, with a minimum horizontal tower spacing the antenna has excellent overall radiation efficiency. Construction is of stainless steel wire elements with die cast aluminum component housings and UV resistant fiberglass spacer rods with coaxial cable connector. Lightweight but extremely robust and with a low total mass and low wind loading. Can be installed as "flat top" broadband dipole, a "sloper" or as an inverted V.

BROCHURE
Please reload

WHAT'S NEW?

For over 50 years, Micom has been the industry leading commercial HF Single Sideband radio. Led by Mr. David Carothers, Royal Communications International, Inc. have loyally serviced and supported Micom customers for over 30 years. As such, it is with great sorrow which we relay the factories’ announcement that the Micom line has reached its end of life. Production will end 30 September 2020.  After this date we will no longer be able to accept orders for Micom products.

​

Accordingly, we request you place a "Last Time Buy" order prior to the end of September 2020. Although the Micom transceivers will be unavailable after that time, we will continue to supply compatible HF antenna tuners, antennas and various other Micom accessories as listed on our website.

​

Royal Communications International, Inc. will continue to provide support and repair services for the Micom 3 series radios for the duration of remaining warranty. Repairs for Micom transceivers that are no longer covered under warranty will be available as long as commercially viable. With regard to Micom-2 series transceivers, unfortunately, we are unable to continue providing repair services, due to a lack of available spares and parts.

​

While this message may have initiated on a somber note, we are pleased to announce our new partnership with Barrett Communication USA Corp. The Barrett 4000 series transceivers are inter-operable with Micom transceivers, certified by JITC to MIL-STD-181-141B and are NTIA compliant.  The Barrett 4000 series transceivers include key differentiators from the Micom and competing transceivers in the market. Namely, built in IP networking, color touchscreen display, removable/remote-ready control head, USB port for easy upgrades and programming, and several other advanced features. Barrett Communications Pty Ltd., was founded in Australia, and through growth and acquisition have had a presence in the United States for 40 years. 

​

Additionally, we are excited to announce the 4000 series radios are now manufactured in the United States, specifically to meet the demanding requirements of our federal, state and commercial customers. The user-friendly Barrett 4000 series radios boast a (6) six week or shorter lead time, this combined with Royal’s class leading technical and sales support, full-service capabilities and a USA factory, you can be assured of fast and reliable support.  

We apologize for any inconvenience this situation may have caused. We are optimistic that the transition from Micom to Barrett will be smooth and we hope to make the transition with you, our valued customer.  You can still expect the same fast, personalized, reliable service and technical support that you have become accustomed to with Royal Communications.   

LAST EVENT

During the summer June-July 2017, pilot Brian Lloyd commenced his round-the-world flight to commemorate Amelia Earhart’s route eighty years ago in 1937. The two month flight followed Earhart’s historic equatorial route. Royal Communications International, Inc. was honored to support Brian throughout his expedition.

 

“I chose the Micom3T transceiver for my historic recreation of Amelia Earhart's flight due to its robust construction and outstanding reputation for reliability in a harsh environment. While the control head is mounted in the cabin and lives in a more benign environment, the receiver/transmitter unit resides in an unheated and unpressurized avionics bay where the temperature may vary from +45C to -20C and the altitude may top 24,000 feet. In spite of this harsh environment the Micom3T performed well. 

 

But even the best equipment can fail and I did experience an intermittent failure of the receiver/transmitter unit. A single call to Royal Communications had a replacement unit on its way to me on the other side of the world in a day. Clearly the emphasis was to get my communications back up and running reliably as quickly as possible. I am extremely pleased with the level of support I received. The replacement unit operated and continues to operate reliably.

 

I recommend Royal Communications and Micom products without any reservation. They provide excellent service, great support, and reliable products. Thanks Royal!” - Brian Lloyd

3135 Coachman Court, Oceanside, CA 92056

Tel:  760_529_9518

Fax: 760_529_9568

​

Email: sales@royal-communications.com

    DOWNLOADS
    • Facebook Social Icon
    • LinkedIn Social Icon